Put those remnants to good use and make our own Tiki Pallet Wall Art:
I tried my hand at making a bit of Tiki wall art by using some of my remnant pallet pieces. I started by getting a piece of plywood that I used as the base of the project. Next, I trimmed the various remnants to size and dry-fitted them. I shaped them and sanded the pieces until they were smooth. I applied a base coat of acrylic and let the pieces dry. Then, I glued and screwed them to the plywood for rigidity. Finally, I painted the pieces the way I wanted and applied a coating of varnish to seal. I think my Tiki Pallet Wall Art came out pretty neat, and it used scraps of pallets!
Editor’s note: When dry-fitting and then coating the project, it can help to use a pencil and number the backs of the pieces, putting a corresponding number on the position of the plywood, so you don’t glue a piece down in the wrong location.