Wouldn’t you love to have a Pallet Clock like this one? You can make one yourself from a piece of a pallet and a clock that cost 1 Euro!
How I made my Delicious Pallet Clock:
I used a piece of a wide lead board for this piece. I drilled out the hole and cut a space for the clock mechanism body to reside. I dry-fitted it, and once I felt it was seated properly, I removed temporarily. I cut some decorative edges on the board, to give it a general shape of a piece of bread. Then I used a Dremel VersaTip tool to do the decorative pyrography along the edges. When I was satisfied with the look, I added the face numbers and then sealed the piece. I reinstalled the clock mechanism and added a picture frame hook on the back so I can hang it up.
Editor’s Note: Per the manufacturer, Dremel VersaTip is a “Multipurpose tool for woodburning, soldering, hot knife cutting of styrofoam and plastics, cutting and fusing rope.”
We are not receiving any compensation, nor are we specifically endorsing any products mentioned. This is for informational purposes only. Please follow the manufacturer’s directions and safety guidelines when using any new product. Read about it here.
ritagliato con traforo da pianale da pallet, orologio preso su aliexpress a meno di un euro. effetto bruciato con fiamma con dremel versatip, finitura superficiale con cristallizzante per parquet