Pallet FurniturePallet Bars3 Pallet Bar Features Mod Podge Picture Top

gravatar

by Bobthebuilder

3 Pallet Bar Features Mod Podge Picture Top

  • 3 pallets

  • medium

  • 40h

  • $160

I built this 3 Pallet Bar for my daughter and added many photos on top that I attached with Mod Podge. I used a full pallet for the front and cut two pallets to the same size for the sides. I sanded the bar for hours and stained it when finished. I added a wine glass rack, colored lights for effect, and coated the top with three coats of epoxy.

Make a 3 Pallet Bar as a great gift for a family member or yourself!

I found three pieces of wood with attractive curves on the edges, and it gave the project a nice touch. Then I added a wood shelf on the inside for storage. Some finishing touches on the main bar: I first put a coat of pre-stain to prep the surface. I printed and cut out pictures, attaching using Mod Podge. When the adhesive was dry, I applied three coats of epoxy.  Epoxy is fun to work with but be sure your surface is level, and you have plastic under your project. The bar top came out nice. Finally, I added colored lights and attached the two side pieces using bolts to the main bar so that it is easy to move.

3 Pallet Bar Features Mod Podge Picture Top Pallet Bars
The finished bar came out great. I added the galvanized pipe for both the look and structural support of the bar top.
3 Pallet Bar Features Mod Podge Picture Top Pallet Bars
I used a full pallet for the front and did a lot of sanding to get it smooth.
3 Pallet Bar Features Mod Podge Picture Top Pallet Bars
Use a band saw, or jigsaw to cut out a simple stemware holder. I added a shelf for additional storage.
3 Pallet Bar Features Mod Podge Picture Top Pallet Bars
Once I attached the sides, I installed the top.
3 Pallet Bar Features Mod Podge Picture Top Pallet Bars
The shelf comes in handy, as does the stemware holder.
3 Pallet Bar Features Mod Podge Picture Top Pallet Bars
I covered the front of the bar with a piece of plywood.
3 Pallet Bar Features Mod Podge Picture Top Pallet Bars
The finished project.
3 Pallet Bar Features Mod Podge Picture Top Pallet Bars
I added numerous photos to the top and attached them to the bar with Mod Podge. When the adhesive was dry, I applied three coats of epoxy to create a durable, high-gloss finish.

3 Pallet Bar Features Mod Podge Picture Top Pallet Bars

3 Pallet Bar Features Mod Podge Picture Top Pallet Bars

Resources for this project:

0 0 votes
Article Rating
Subscribe
Notify of
guest
1 Comment
Inline Feedbacks
View all comments
Tammy Barlow

I’m going to have to talk my son into helping me do this considering he’s a graphics designer for a beer company.

Latest Classified Ads

Scroll to Top