Today, we will share an excellent step-by-step tutorial to build a kids table with its chair. It's a nice project, as you can do it with your kids, they will develop their capabilities and cope up with new situations and face challenges when they arise. Let's make a study table and its chair for them.
Step 1: Materials needed
- Two wood pallets
- Safety gloves
- Safety goggles
- Face mask
- Handsaw or power saw
- Measuring scale
- Measuring tape
- and spray paint of your choice
Step 2: Dismantling wood pallet
First, you'll need to dismantle one of the two pallets (one pallet for the table and the other one for the chair). For this, I'm using two hammers, but you can check our article to learn how to dismantle a wood pallet in different ways. Also, my goal was to reuse all the nails present in the pallet, so I'll save them and keep them aside when dismantling the pallet.
Step 3: Plan for the table
Above is the plan of the kid's table. Let's start to build the table.
The table can be built in 4 steps:
- Assemble the legs and keep them aside.
- Assemble the top section of the table.
- Join the sides that will be holding the legs of the table.
- Join the legs to the top section of the table.
Step 4: Woodcutting
Using a handsaw or a power saw and by following the proper measurements of the table you want, you'll have to cut all the wood that is required to build this kids table. For info, it took me approximately an hour to have all the pieces ready.
Step 5: Building the table
First, you'll need to assemble the legs of the table. By putting a piece of wood over the legs, you will join them all together as shown in the picture below.
Then, you will need to join the pallet planks that will become the top of the table.
Next, you will join the side that will hold the legs.
Once all the side are joined together, its time to join the legs to the top section of the table. With a bit of helping hands, I had the table almost ready.
Step 6: Plan for the chair
- Assemble the legs and keep them aside.
- Assemble the top sitting area.
- Join the sides that will be holding the legs of the chair.
- Join the legs to the top section of the chair.
- Assemble and fix the back of the chair to the sitting area. The sitting area of the chair is merely a smaller version of the table so that the assembly will be the same as for the table.
Step 7: Woodcutting
Start cutting the wood pallet planks to the right dimensions as defined in step 6.
Step 8: Building the chair
First, start by assembling the legs of the chair.
Once the legs are ready, assemble the sitting area. Take the example of the table as the building process is the same one. Then, join the legs to the sitting area as shown in the picture below.
Once the sitting area is ready, you'll need to assemble the backrest and attach it to the sitting area.
Step 9: Sanding
Now that we have both the table and the chair ready, it's time to sand both and give them a smooth finish. You can get wood sanding tips for your pallet projects.
- Random orbital action for high removal rate and a high quality finish
- Hook and loop system for fast and easy paper changes
- Dust sealed switch to keep all dust and debris out
- 3.0 Amp motor spins the pad at 8,000 - 12,000 OPM
- Shorter height minimizes the distance between user and work piece
- Design reduces vibration and the rubber over-mold in critical areas reduces user fatigue
Step 10: Painting
We recommend applying a wood primer before painting (painting is optional, but kids love colors!). Then, paint both the chair and the table. We applied two coats of paint and then let it dry for a few hours. Check out 17 helpful tips before painting wood pallets.
Step 11: Hot glue (optional)
Both the table & the chair will be used inside the house. As we want to avoid the pallet wood to scratch the tiles on our floor, we are going to apply some hot glue under the legs of the table. You can use other methods to protect your floor, such as furniture pads.
- X-PROTECTOR FURNITURE FELT PADS - best protection for Your wooden, laminate or tiled floors. Our furniture coasters create strong shield between floor and furniture, desks & tabletops, which...
- ONLY NOW 1 + 1 PACK X-PROTECTOR! 1 brown (106 piece) + 1 beige (27 piece). Total 133 chair glides. That's all furniture floor protectors You need at home - brown for dark furniture and beige for...
- DIVERSITY SIZES X-PROTECTOR anti scratch furniture pads - brown 106: (45) ¾", (24) 1", (36) 1x1", (1) 3x4" + beige 27: (10) ¾", (8) 1", (4) 1 ½", (4) ½x6", (1) 4 2/3x6". A lot of sizes of chair...
- REGISTERED BRAND ON AMAZON: Protects and Anti Slip Pad with MULTIPLE SIZES - already "scored" to make easy cutting. Sizes 4"x4", 2"x2", 1"x2", 1"x1", 2" L Shape - You can make sixteen 2"x2" pads for...
- Why buy anything else? Solid Felt Core. Anti Slip Rubber will not mark floors. Protects floors. No nails. No glue. Anti Slip rubber grabs leg and floor.
- Non adhesive. Use under Sectionals, Beds, Chairs, Recliners, Tables, Ottomans, Sofas
Step 12: Voila!
What do you think of this project? Feel free to comments!
And now, the building process in a video: