Comfortable, unique and kind to your wallet. This Innovative Inner Tube Pallet Lounge Set meets all those descriptions! Plus, this set is easy to build! The table measures 80cm x 80cm x 90cm (31.5″ x 31.5″ x 35.5″ tall), and the set of four chairs measure 40cm x 40cm x 65cm (15.75″ x 15.75″ x 25.5″ tall), and used 30 bicycle tubes. I got them free by going to the local bicycle dealer and upcycling damaged ones. :)
Inner Tube Pallet Lounge Set – The Table:
The table and chairs are all based on the same style. First, build the top frame of the table (directions listed above). The frame boards are butt-joined and secured with screws. We added cross-bracing to prevent the tubes from sagging. Next, cut the table legs to length and install them into the inside of the frame. Secure with screws. We added a lower shelf by installing deck boards around the legs, mitering the corners, and installing cross-bracing to install the boards too. Finally, we added more deck boards to fill in the lower shelf and secured them with screws.
Inner Tube Pallet Lounge Set – The Chairs & Finishing:
We built the chairs similarly to the table but skipped the cross-bracing in the top. We installed inner tube pieces and move them to the table top and chair top, securing with staples as we progressed. Finally, we wrapped the table top and the chair tops with more inner tubes to hide the staples. We haven’t decided if we’ll apply a stain or finish of any kind, but we’re happy with the outcome of this unique set. So talk to your local bicycle dealer and see if they’ll save popped inner tubes for your next project!
enkele paletten van 1400×80 (verloren verpakking)
- stoeltje 40x40x65
- tafel 80x80x90
binnenbanden van een fiets 30 stuks (kapotte binnenbanden bij fietshandelaar gratis te verkrijgen)