Our shop is going to have a few upgrades to showcase some of our new ideas so keep an eye out for our new pics.
This shelf was built from a smaller pallet, it only takes 6 slats. The pallet was cut at a 45-degree angle on all 4 corners once angles were cut Ipresanded all the pallet to remove rough edges. I used carpenter wood glue and some finish nail gun to help hold into place.
The shelves were measured and cut into 45-degree angles as well then the gluing process repeated to hold shelves Into place.
To attach shelves I used wood glue and nail gun and attached to stud inside walls...then some decor to dress it up.