There were about three different types of pallets used for this coffee table. One was for the frame that is 2″x4″s. Another I used for the top and another for the sides and legs. The structure is pretty basic and only took about an hour to make. The top took a few hours because of all the cross cuts. I booked the legs with lag bolts before adding the side trim. The top trim was last which I routered fit a smooth corner. Finish staining was done with black walnut, golden oak, ebony and a natural. I topped it off with three coats of polyurethane and a 36″x36″ piece of glass.
Black Walnut Pallet into Coffee Table
3 pallets
medium
8h
$60
Beautifully made, thank you for sharing your project.
Mais elle est superbe cette table……..
Very nice.