When Digital marries Pallet Wood, you can put High-Tech Devices in Low-Tech Pallet Frames. I have been working on some projects that put together the idea of the digital devices we use and how to make them look rustic or less modern. This is my first creation: 4 digital picture frames placed into one single wood frame.
About my Pallet Frames:
Of course, I use pallet wood. I used a technique of pressing the wood hard against the table saw to create some burnt areas while I split the pallet wood planks. Next, I ripped the deck boards down to approximately 1 1/2" for the thickness, but you could rip them down to any size you wanted. Finally, I put the frame pieces in so that they almost resembled window mullions.
Next, I sanded the frame pieces gently, preserving the saw character and natural interest of the pallet wood. I dampened a cloth with stain and just kind of went to town on the piece. I ended up staining the front and back.
Finishing touches on the Pallet Frames:
I ended up routing out the wider deck boards on the back. This allowed the SD cards and power cords to connect to the back of the picture frames. Otherwise, the deck boards held in the digital frames. The picture frames where measured and the wood cut just right so the wood wedges the pictures in place. Well, it is pallet wood, so it was almost perfect... but some tape and wedges on the back fixed the imperfection.
The picture frames used to be some red color. I used a can of matte-finish black spray paint to take care of that pesky red color.
Hope you like, and it inspires you to marry more technology with rustic wood!
Editor's note: We love that you were courageous enough to show us that even when working with imperfect pallet wood, you can adapt and conquer any pallet project like these digital & pallet frames. PS - keep these digital/wood marriages coming - they're very interesting!