To build this rocking chair, I used:
- two pallets,
- 21 mm plywood,
- oil wax coating.
I first cut the first pallet in the desired size, then used the boards from the second pallet for building the back of the rocking chair. I mark the plywood and sawed with a jigsaw. Sobral. Resize. Then carefully polished. Covered with several layers of oil from the wax.
Для изготовления кресла-качалки использовал 2 паллета, фанеру 21 мм,масло с воском для покрытия. Сначала обрезал паллет в необходимый мне размер, потом подготовил доски от второго паллета для изготовления спинки. Разметил и напилил лобзиком фанеру. Собрал. Подогнал размеры. Дальше тщательно отшлифовал. Покрыл несколькими слоями масла с воском.
do you have plans for this rocking chair if so please post them
Very Nice do you have plans with measurments for this rocking chair ?
COuld you post them or send them to me by e mail ?
thanks
Pascal
I don’t see the blueprints or plans for this rocking chair. Can someone please help me with this?
Very well done
Отличная работа! На какой вес рассчитано кресло?)
Loving the rustic look.
Stella job, well done.
Thank you!
Please show a back pic