Hello, I would like to share my work with you. I had an unused wood pallet board that I decided to use to decorate my room.
I divided this pallet plank into 3 equal parts and joined them together in the form of a rhombus.
Then, I printed an image of a cannabis leaf, cut it out, and wrapped it around a rhombus on the board with a pencil.
Next, it's a matter of technique! For the convenience of sawing, I divided the diamond into the initial 3 parts and cut the pattern with a jigsaw, nothing complicated, but be careful and take your time
After that, I connected the puzzle again, and this time on the reverse side I connected them all together. Then I painted the boards with lacquer and left them to dry.
Then I took the metal cleaning nozzle and walked it all over the surface, it became more relief. I used my favorite colors for the paint: green, yellow and red acrylic paint. On the back side, I glued the LED strip and powered it with a 9 Volts battery. Voila.
All peace and kindness. Love each other! From Russia with love!