I made this section of fence out of the slats of eight pallets, a 10′ 4″x4″ treated planks, two 8′ (approximate) 2″x4″ treated boards and approximately 50′ of 1″x1″ treated boards around the perimeters and a box of #8×1 1/4″ screws.
I spent a fair amount of time ripping wide boards and warped boards into the dimensions desired. The primary pattern is simply 45-degree angles, but each piece along the bottom edge is custom fit. I discovered early on that I needed to drill pilot holes before using screws. Otherwise, I risked splitting the boards.
The project took over 16 hours (digging a post hole takes time in rocky soil) but will be well worth the effort.
To follow up, check-out my update of this backyard pallet fence.
A Shaker Style Kitchen cabinet doors with pallet wood center panels and poplar wood frames…
Glass has a high carbon footprint, and horticultural glass is expensive, so I just…
Christmas is here and I wanted to create my own Christmas decorations using wooden pallets.…
I made a Pallet coffee Table from recycled pallet blocks and sold it to a…
Tips for building an 8,000-gallon pallet pool for your kids, family, and their friends.
View Comments
This is great! Are there any PDF plans I could print out to help?
For weeks I've been trying to figure out how the wood supplies match the pictures. How is the wood flush?Are you ripping the a 2X4 for the second layer of the base or is that 2 1x1's?
How wide is this fence?
Thank you for sharing!
I absolutely love your fence, it is beautiful! Thank you for sharing your design with everyone!
Thank you to all for the kind words.
Do you have plans you could share on how you did this? Or specific instructions on how you put it together? I know you mentioned your materials but I'd love directions on how to make it look like you did!
Jennifer Smith Dias
Encore un contrat pour ton paternel Cindy.
Ça pourrait être pas mal... Et pas trop compliqué en plus..
Beautiful