After pulling the pallets apart, I put them through the thickener so all the pallets were the same size. I then worked out how high I wanted to go and as the stingers were 1100, I decided that I would utilize that height. I measured the larger tools for the width and depth.

I then used a number of pallets for the body and placed each tool on the shelve above to give me height and where each electrical tool was being placed. On completion, I used MDF for the doors, and put a bolt on the doors so they can be locked. I left it raw as I liked the look.

derzsi

Recent Posts

Pallet Doors with a Poplar Twist!

A Shaker Style Kitchen cabinet doors with pallet wood center panels and poplar wood frames…

2 years ago

Pallet Work Bench

Pallet work bench on castors to create more pallet items.

2 years ago

How I Made This Cold Frame From Pallet Wood & Discarded “Ikea” Glazed Doors

  Glass has a high carbon footprint, and horticultural glass is expensive, so I just…

2 years ago

Pallet Christmas Décor

Christmas is here and I wanted to create my own Christmas decorations using wooden pallets.…

2 years ago

I Made a $1599 Coffee Table from Pallet Blocks and Epoxy

I made a Pallet coffee Table from recycled pallet blocks and sold it to a…

2 years ago

How I Made a Pallet Pool During The Covid-19 Pandemic

Tips for building an 8,000-gallon pallet pool for your kids, family, and their friends.

2 years ago