You found some free pallets, and have the perfect idea in mind. What next? You try to dismantle the pallets, but break more wood planks than you save. Here’s where this tips page will come in handy. We’ll share eight ways to learn how to disassemble a wooden pallet, including DIY videos & tips! If you have other ways to disassemble a pallet not listed here, do not hesitate to comment and share with our community your way od disassembling wooden pallets.
The first task to perform when you start a new project (after finding a pallet), is to then disassemble a wooden pallet. But you need to know how to do it to prevent splitting and breaking the pallet deck boards and keep nice wood planks. We’ll show you eight different methods to break down those pesky pallets – and we address different pallet types and tools you have handy.
How to Disassemble a Wooden Pallet – Method 1 – The “No Tools” Way:
The first thing to know is that disassembling a wooden pallet will require a lot of patience, a lot of attention and a lot of elbow grease, yes this is not as simple as it looks. The method listed below will depend on the tools you have in your arsenal and the type of pallets you want to dismantle.
- Imagine you have no tools at your disposal, nothing, only some boards leftover… OK, we must admit that starting a pallet project without any tools is a pretty big challenge, but there is a method to dismantle a pallet with absolutely no tools, you only need two boards or wood planks. And, by applying this method as shown in the video below, you could achieve the zero reject objective without breaking any pallet slats.
How to Dismantle a Wooden Pallet – Method 2 – The “Hammer” Way:
- You only have a hammer, and you want to dismantle a pallet. Start by dismantling the base of the pallet by hitting the chocks (or dice or blocks). Then, to detach the top planks/section of the pallet hit on the wood planks behind that maintains the structure of the pallet (their chances that these planks will be unusable as you will break them). That’s it! Watch the video bellow for an illustration of this method. This is by far the simplest way but also the more “destructive” one, and you will lose some pallet planks during the process… but remember that you only have a hammer with you :)
|1||Maxcraft 60626 8-oz. Stubby Claw Hammer||503 Reviews||$11.00||Buy on Amazon|
|2||Stanley 54-304 5-Ounce Magnetic Tack Hammer||312 Reviews||$9.52||Buy on Amazon|
|3||Stanley 51-163 16-Ounce FatMax Xtreme AntiVibe Rip Claw Nailing Hammer||181 Reviews||$18.36||Buy on Amazon|
|4||The Original Pink Box PB12HM 12-Ounce Claw Hammer, Pink||202 Reviews||$11.00||Buy on Amazon|
|5||Father's Day Gift Thank You for Helping Me Build My Life DIY Gift Engraved Wood Handle Steel Hammer||576 Reviews||$39.99||Buy on Amazon|
How to Disassemble a Wooden Pallet – Method 3 – The “Hammer & Brick Chisel” Way:
- For this one, we suppose that you have a hammer and a brick chisel to dismantle your pallet. First, before starting the pallet disassembly process, you will need to cut the nails between the wood planks with the help of the brick chisel. Insert it between the planks and the rafters (or dice or blocks) and then hit it with the hammer. Don’t hit too hard as you will break the wood planks, start to hit softly and repeat again and again until the nail breaks.
How to Dismantle a Wooden Pallet – Method 4 – The “Hammer & Old Plank” Way:
- This method is one of our favorite method (tested & approved), it didn’t require any pallet disassembly tool, only a hammer and an old wood plank (from another pallet for example) that will be used to absorb all the hammer hits and impacts. This method is one of the best to avoid breaking all the planks of the pallets. To start, turn the pallet upside down and knock the chocks (wooden supporting blocks or dice) out. The pallet disassembly technique in this method is to distribute your blows with the lump mallet between the three blocks and gradually knock the section apart. Once you have done this to all three supporting sections, place these pieces underneath the main body of the pallet. Using the claw hammer knock the revealed nails through their holes. Try to get all nails out of the wood otherwise; you risk damaging your tools when using the pieces for your next project. Knocking nails out of wood is a skill that requires being patient and accurate. Use the lump mallet to rock the nails into shape if they bend. If a nail becomes to malleable cut it in half using pliers or a hacksaw and tries knocking it out again. Once those nails are out, use the pry bar to take strips of wood. In this case, as there are seven strips all the remaining number strips are released using the even number strips to pivot the prybar. Turn the remaining section over and again on the blocks, knock the last strips of wood out. Watch the video below for a live example.
How to Disassemble a Wooden Pallet – Method 5 – The “Claw Bar” Way:
- For this method, you will need a claw bar (or a pick) and a hammer. This method is used to remove the pallets dice. Using the hammer, tap alternately on the dices to slightly loosen them. To avoid damaging the wood and spread the shock, use a tapping block between the dice and the hammer. Place your hammer between the cross and the dice, and then pry. Reproduce this gesture with the claw bar to finish the removal.
How to Dismantle a Wooden Pallet – Method 6 – The “Hacksaw” Way:
- This one is for those who are well equipped and have a hacksaw available. Saw the nails by placing the blade of your hacksaw between the planks and the rafters, or dice, depending on the kind of pallet. If the space to insert the blade is too narrow, pry with a small screwdriver to spread the planks.
How to disassemble a Wooden Pallet – Method 7 – The “Sawzall” Way:
- This method is the fastest one and is like the previous method. You will need for it a Sawzall (also called a reciprocating saw); it’s an expense but if you have a lot of pallets to dismantle it could save you a lot of time. Use with your Sawzall a couple of 12’’ construction blades that are more robust than the little 5’’ blade delivered with your brand new Sawzall. Then, the method is simple, take your Sawzall and set it on its side and simply slice through the nails on each end of the pallet…repeat this operation for all the planks of your pallet. Watch the video below by Sarah James; it’s better than thousand of words (and watch the process, not Sarah :))
|1||DEWALT DCS387B 20-volt MAX Compact Reciprocating Saw (tool only).||302 Reviews||$98.70||Buy on Amazon|
|2||BLACK+DECKER BDCR20B 20V MAX Lithium Reciprocating Saw - Battery and Charger Not Included||342 Reviews||$42.55||Buy on Amazon|
|3||Bare-Tool Milwaukee 2625-20 M18 18-Volt Hackzall Cordless One-Handed Reciprocating Saw (Tool Only,...||249 Reviews||$89.99||Buy on Amazon|
|4||Ryobi P514 18V Cordless One+ Variable Speed Reciprocating Saw (Bare tool only, battery and charger...||104 Reviews||$51.99||Buy on Amazon|
|5||DEWALT DWE304 10-Amp Reciprocating Saw||405 Reviews||from $79.00||Buy on Amazon|
How to disassemble a Wooden Pallet – Method 8 – The “Dismantling Bar” Way:
- You can use a pallet dismantling bar such as the one made and sold by Cargo Cycles; it’s a little investment but if you have a lot of pallets to dismantle its worth the money spent. It is the most effective and efficient tool for manually stripping the deck boards from the stringers on used wooden pallets so that the timbers can be reclaimed, recycled or re-used for other purposes. With a little practice, a standard wooden pallet can be stripped in about 2 minutes without damaging any of the timbers.
- Bonus: In the video below, Uncle Knackers use two techniques, the one from Method 3 and the one from Method 7.
How to Dismantle a Wooden Pallet – What About The Nails?
What to do with the nails? You have two options depending on the finish you want to make to your project.
- Remove the nails: If nails were sawed, use a nail punch, a hammer, and a clamp to remove them. Place the nail punch on the cut portion of the nail, then gently tap with a hammer to make it stand out from the other side. Turn your board and remove the nail with the clamp. If the nails are full, tap on the tip to make them stand out, and then remove them with a clamp. Backfill the holes with wood pulp.
- Keep nails: Cut the tip of the nails that protrudes from your board with a hacksaw or an angle grinder.
The choice of removing or keeping the nails depends on you! Keeping the nails adds a certain charm and specific rustic characteristic to the pallet craft you’re making. However, sometimes you’re making a very finished piece where nails won’t add to the appeal. It’s strictly up to you.
No matter what you do, take care when working with pallets. Don’t forget that the nails are in place if you leave them – they could cause significant damage to your tools – and to YOU. ALWAYS wear protective gear, especially goggles or safety glasses when working with pallets.
We hope these methods will help you to disassemble your pallets, particularly for those who don’t own a reciprocating saw (Sawzall) or have one at their disposal. Do you have another method to share? Share it with our readers through the comments and if you have some videos or tutorials, do not hesitate to send them to us, and we will update this article accordingly.
Also, don’t miss our review of the different commercial pallet dismantling bars available, to be sure to choose the best pry bar!
Happy Pallet Crafting! :)