To make this pallet bench I used two pallets, first of all, I sanded then cut to the extent necessary to connect them. I used screws for almost all the bench. The rear bench legs were cut at 15 degrees angle to get a slight slope to the back. I then used canoe colored lacquer. This oak bench is 119 cm long, 102 cm high, 46 cm width. The height of the seat is 51 cm.
A Shaker Style Kitchen cabinet doors with pallet wood center panels and poplar wood frames…
Glass has a high carbon footprint, and horticultural glass is expensive, so I just…
Christmas is here and I wanted to create my own Christmas decorations using wooden pallets.…
I made a Pallet coffee Table from recycled pallet blocks and sold it to a…
Tips for building an 8,000-gallon pallet pool for your kids, family, and their friends.
View Comments
really good design,minmalized the take apart and reconfigured. Very much enjoy seeing how the creative process unfolds for people.Thanks
very nice, where did you start,? what are the steps?
Tkx
François
Wtf?
I like the way the legs are sandwichewd.
nice