This Framed Pallet Headboard was fairly easy to make and took me about four hours to build. It was a nice project to try out my new workshop, and we’re pleased with how it came out!
Here’s our Framed Pallet Headboard:
First, I gathered and dismantled a few pallets. I cut the frame pieces out of stringer boards, cutting them to the bed dimensions and height I wanted. I built a sub-frame for a place to mount the deck boards too, and secured it with screws. Next, I began puzzle-piecing deck boards in, staggering the joint lines, but I had fun with putting darker-toned wood as the focal center section. Initially, I secured the deck boards with a pneumatic nail gun, but also used screws to strengthen the overall build.
Finishing it up, I applied the top and outer frame and secured them in place after sanding the center section. Next, I sanded the outer frame, and then I applied two coats of varnish. I allowed it to dry between coats and very lightly sanded per the container’s instructions.
Démontage des palettes. Découpe des palettes aux cotes. ponçage Assemblage avec un cloueur pneumatique, vissage pour solidifier le tout. Re-ponçage 2 couche de vernis 1/2 journée de travail dans mon nouvel atelier pas encore organisé ;-) Pas de difficulté particulière .