A lamp for the living room of my girlfriend’s apartment. I glued and screwed three pallet planks, made holes and used coffee jars mounted with screws which I chose to make “visible“. Didn’t paint it since I thought this type of pallet wood would look better unpainted.
I’m interested in doing something similar… could you show how the fixtures are wired together?
It’s fairly easy… A lamp socket must be fitted with two wires. You begin by connecting two wires to the first socket. Then you measure the lenght between the fist socket and the next one. You strip the wire, without cutting it, and connect it (the same wire) to the other socket. So, you end up with the first edge of the wire connected to the first socket and the other edge is to be fitted to the electrical supply/source. The point is that you must have the sockets connected with the same wire. It’s called “parallel connection”. Look it… Read more »
Marcelo Fininho,preciso, me ajuda!
Chai Yo concept is great :)